These dreamy soft bodysuits are fit for everyday or for special occasions. The breathable bamboo fabric will keep your baby comfortable and stylish - you’ll have the cutest kid at story time.

• Features a short sleeve, can be worn layered with pants or on its own!
• Envelope neck and snapped bottom for easy dressing and diapering
• Made with 97% Bamboo Lyocell, 3% Spandex
• Machine washable
• Made in the USA

Made with 97% Viscose from Bamboo, 3% Spandex Enough room to accommodate cloth or disposable diapers Full-length pants with elastic waistband Printed with non-toxic dyes
Machine washable
Made in the USA

Made with 97% Viscose from Bamboo, 3% Spandex Enough room to accommodate cloth or disposable diapers Full-length pants with elastic waistband Printed with non-toxic dyes
Machine washable
Made in the USA

Made in United States of America

Silicone flange inserts reduce 24mm flange tunnel to:

10mm, 13mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm

These cost effective silicone breast pump flange inserts will reduce a 24/25mm flange size for a more comfortable fit and help you to remove more milk.

• Sturdy, thicker, stronger and easy to use
• Smooth milk flow due to the built-in notch
• Versatile compatibility with many name brand flanges as listed
• Also good for elastic nipples due to longer nipple tunnel

Soak in cold water if milk has dried on them. Wash in hot soapy water, rinse well and air dry. 

Heat resistant - can be sterilized in boiling water. Sterilize before use.

Call Donna Bruschi, Lactation Consultant to help with sizing. 845-750-4402

Compatible most 24/25mm pump flanges: 

• Medela
• Spectra
• Lansinoh
• Motif
• Elvie
• BabyBuddha
• Hygeia
• Evenflo

Silicone flange inserts for Medela/Maymom/Spectra/Ameda 25/24 mm breast pump shields.  2pc/each

Maymom base connector for Ameda purely yours pump; 2pc/pack

Maymom Breast Pump Kit fits Pump in Style Maxflow includes 2 back flow protectors, 2 flange bases, and 2 duckbill valves -tubing and flanges not included

Maymom Colostrum & Storage Bottles Leak Proof Lids, Breastmilk Freezer or Refrigerator Storage, 2pc/pk

Flange adapter; connects between a Medela flange and Spectra backflow protector; 2pc

Maymom connector adapter; connects between a Medela Freestyle (old version) connector/ or pump and a bare end tubing;
connects between Medela Swing Maxi connector and a bare end tubing; 2pc

Maymom connector adapter; connects between a Medela Sonata connector and Spectra S1, S2 pump;
connects between a Maymom wide mouth flange/connector and a bare end tubing; 2pc

Maymom connector for Medela Personalfit like connector (narrow bottle connection), top air connection; 2pc

Maymom Connector Adapter; connects between a Medela PIS MaxFlow/Freestyle Flex flange kit and Spectra S1/S2/9 pump tubing; Connects Maymom narrow neck flange connector and bare tubing 2 pc

Maymom Connector Valve Compatible with Medela Pump in Style MaxFlow, Freestyle Flex, Swing Maxi, Sonata, Freestyle Breastpumps

Infant feeding cups, 30mL, 4pc/pack

*Kit Contents:

1. Wide mouth Flanges (24mm) X2
2. Backflow Protectors X2
3. Tubing X2
4. Flat O-ring X2
5. Duckbill Valves X4
6. Bottles  X2
7. O-Ring X2
8. Cap  X2

Work with Spectra S2, Spectra S1, Spectra 9 Plus Breastpump. Nipples and Dome Caps are NOT included in this kit

Other flange sizes available at Maymom: 15mm, 17mm, 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm

*All pump parts made by Maymom. Not Original Spectra S2 Accessories. Not Original Spectra S1 Accessories. Not Original Spectra Pump Parts

*Compatible and interchangeable with Spectra pump parts. Same suction power as OEM parts. Replace Spectra Flanges, Spectra Duckbill Valves, Spectra Backflow Protectors, Spectra Tubings, Spectra Bottles (Wide Mouth). 

*The One-piece cap of Maymom bottle includes sealing ring for secure seal. NO waste of milk. Designed for travel and storage of formula or breast milk. It's also perfect to convert baby feeding bottle to storage or snack container

*Material does NOT contain any BPA. Can be sanitized with water steam, boiling water or microwave-steam bags. Comply with FDA regulations for plastic materials that contact food

Frequently Asked Questions
Q: How to avoid breaking the backflow protector during setup with the flange?

A: Turn to insert the backflow protector into and off from the flange with care. DO NOT push in or rock straight in and out with force. It will break.

Q: Does the bottle include a nipple?

A: No, the bottle includes one-piece cap WITHOUT nipple.

Q: Where can I find the size marking on the flange?

A: It is marked at the end of the nipple tunnel.

Q: How do I choose the flange sizes?

A: Since your nipples will enlarge after pumping, measure the diameter of your nipples AFTER a pumping session. Do NOT include the areola. Fitting is available from Donna Bruschi, IBCLC.

Q: How do I clean them?

A: Disassemble all parts. Clean them with soapy water, and rinse with tap water. Sterilize all parts with water steam for 15 minutes or in boiling water for 5 minutes. When using boiling water, make sure to cover all parts with water to avoid melting them.

Q: Are they dishwasher safe?

A: You may dishwash flanges, bottles and backflow protectors on top rack with LOW heat drying. However, we DO NOT suggest dishwashing the duckbill valves. Please handwash the valves with care.

Maymom MyFit Base Connector (compatible with Ameda) Use with MyFit half flanges for a perfect fitting flange and pumping experience.

For use with MyFit Half Flange Breastshields:

• Fits a standard-neck Ameda or other standard-neck bottle.
  
• Compatible with Ameda Mya Joy, but not Mya or Mya Pro.
• Compatible with all older Ameda pumps

ALL PUMP PARTS MADE BY MAYMOM with same suction power as OEM parts. These are NOT original Ameda pump Parts, NOT original Ameda spare parts. NOT original Ameda connectors.

ALL PARTS ARE MADE OF Polypropylene, a BISPHENOL-A (BPA)/DEHP-FREE MATERIAL. All components are steam safe for sterilization. US FDA registered medical device (No. D192499); Products are inspected by US FDA. Complies with US FDA and EU standards for containers that contact food and class II medical device; Test reports are online for reference.

RETAIL POLY-BAG PACKED. Sealed by the manufacturer, Maymom.

Maymom MyFit Base Connector (compatible with Spectra S1, S2, 9) Use with MyFit half flanges for a perfect fitting flange and pumping experience.

For use with MyFit Half Flange Breastshields:

• Fits a Spectra Wide Mouth bottles, or other wide mouth bottles.
  
• Compatible with Spectra S1, S2, 9
• Compatible with Spectra backflow protectors.

ALL PUMP PARTS MADE BY MAYMOM with same suction power as OEM parts. These are NOT original Spectra pump Parts, NOT original Spectra spare parts. NOT original Spectra base connectors.

ALL PARTS ARE MADE OF Polypropylene, a BISPHENOL-A (BPA)/DEHP-FREE MATERIAL. All components are steam safe for sterilization. US FDA registered medical device (No. D192499); Products are inspected by US FDA. Complies with US FDA and EU standards for containers that contact food and class II medical device; Test reports are online for reference.

RETAIL POLY-BAG PACKED. Sealed by the manufacturer, Maymom.